RC Electric Car BMT 801GT EP KIT 1/8 On/Road
BMT 801GT EP is a competition model that pleases both professionals and beginners drivers.
It’s supplied already pre-assembled to 99%.
The chassis is in ergal 7075 of new generation, with Hard anodization.
It’s has already the front and rear reinforcements.
All the transmission of the model are cardan, at the front CVA homokinetic, the crowns and pinions of the differentials are made of steel and the whole turns on ball bearings.
The shock absorbers are hydraulic (with oil), are of the new Big Bore 17mm type and are completely in aluminum with a 4.0mm steel stem and adjustable by means of a ring nut to vary the spring hardness.
The shock absorber supports are in ergal 7075 from 4mm thick and have various holes for fixing the shock absorbers in order to change the attitude.
The suspensions are fully adjustable, with upper triangle, at the front, with adjustable position and rear tie rod. All angle are adjustable like camber, convergence, height etc.
In addition, the front and rear suspensions are equipped with adjustable anti-roll bars for maximum perfomances!
The whole electronic part is protected by an airtight dustproof box with extra battery box to balance the weight of the model.
The lexan body is supplied already painted, in the splendid white/blue racing livery.
The tires and rims are supplied in the kit, they are slick with medium compound that fit most of the track.
Here are some features of this model:
99% Premounted Kit
3mm ergal frame
Suspension pins in steel
Electronics in an airtight box
3 Geared differentials
17mm Big Bore shock absorbers
Front shock absorber support in 4mm ergal
Rear shock absorber support in 3mm ergal
Rear mud guards
Rear and front stabilizer bars
Adjustable steel tie rods
Adjustable metal shock absorbers
To complete the model car:
Radio 2ch and servo
Motor and ESC
4 AA batteries
3S or 4S Lipo battery